Electro-Harmonix Switchblade+ Channel Selector Footswitch

Electro-Harmonix Switchblade+ Channel Selector Footswitch Review

Electro-Harmonix Switchblade+ Channel Selector Footswitch Feature

• Route your signal to output A or output B or both simultaneouslyEasily switch between different pedal boardsThe tuner jack is hardwired to the input jack and provides a direct output for a tuner or other effects regardless of the state of the unitThe audio path is completely passiveThe Switchblade Plus can be powered by a 9 volt battery or 9VDC eliminator

The Switchblade+ offers a convenient solution to a players switching needs. Route your signal to either output A or B, or send it to both at once. Connect a tuner or effects pedal to its dedicated Tuner output. With a fully passive audio path and active LED indication, the new Switchblade+ is your utilitarian sidekick. Controls A/B Footswitch (LED) Press this switch to route the input signal to either OUT A (Red LED) or OUT B (Green LED).A+B Footswitch (LED) Press this switch to route the input signal to both OUT A and OUT B. When A+B is engaged (Red LED), the A/B Footswitch has no effect on the signal path. I/O INPUT Connect the output of your instrument or another effects pedal to this jack.TUNER Connect this jack to the input of a tuner device or another effects pedal. This jack is hardwired to the INPUT jack and provides a direct output regardless of the state of the unit.OUT A Connect this jack to the input of an amplifier or the input of another effects pedal. Depending on the state of the A/B and A+B controls, this jack will output either the direct input signal or no signal. When the A/B LED is lit red or the A+B LED is lit up, OUT A is selected.OUT B Connect this jack to the input of an amplifier or the input of another effects pedal. Depending on the state of the A/B and A+B controls, this jack will output either the direct input signal or no signal. When the A/B LED is lit green or the A+B LED is lit up, OUT B is selected. Power -The SWITCHBLADE+ can be powered by a 9V battery or a 9VDC battery eliminator capable of delivering at least 16mA. The optional 9V power supply from Electro-Harmonix is 9.6DC-200BI (same as used by Boss & Ibanez) 9.6 Volts DC 200mA. The power supply must have a barrel connector with center negative.The SWITCHBLADE+ can also operate without power, since the audio path is fully passive. With no power, however, the LED indication will not function.When A+B is engaged, the input impedance at the INPUT jack is equal to 50k in paral

Electro-Harmonix Chill Switch Momentary Line Selector

Electro-Harmonix Chill Switch Momentary Line Selector Review

Electro-Harmonix Chill Switch Momentary Line Selector Feature

• Momentarily toggle your instrument's signal path between an external FX loop and dry thruMute your instrument when no effects loop is connectedSwitchable control over the on/off state of the footswitchSilent switchingBuffered bypassBattery poweredOptional 9-volt power supply

The Chill Switch Momentary Line Selector is a new, utilitarian Electro-Harmonix pedal that can be used to provide instant muting. It can also be used to create interesting stutter effects by turning the instrument's signal abruptly on and off for hard rhythmic in/out transitions.In Line Selector Mode, the scope of the Chill Switch pedal's use is only limited by your creative vision. It can, for example, be used to quickly switch in the effects loop, introducing a burst of distortion, analog delay-induced feedback, or ring modulation. The Chill Switch can also be tapped in time with what is being played to bring effects in and out of the signal path rhythmically. This is especially interesting when one of those effects is a delay with tap tempo. The many and varied uses of the Chill Switch pedal are an open invitation for the modern player who wishes to explore the world of unorthodox sound creation and manipulation.

Electro-Harmonix Killswitch Momentary Line Selector

Electro-Harmonix Killswitch Momentary Line Selector Review

Electro-Harmonix Killswitch Momentary Line Selector Feature

• Specifications -
• Momentarily toggle your instrument's signal path between an external efx loop and dry thru
• Mute your instrument when no effects loop is connected
• Switchable control over the on/off state of the footswitch
• Silent switching

The Killswitch Momentary Line Selector is a new, utilitarian Electro-Harmonix pedal. In Kill Mode, the KILLSWITCH can be used to provide instant muting. It can also be used to create interesting stutter effects by turning the instrument's signal abruptly on and off for hard rhythmic in/out transitions.In Line Selector Mode, the scope of the pedal's use is only limited by your creative vision. It can, for example, be used to quickly switch in the effects loop, introducing a burst of distortion, analog delay-induced feedback, or ring modulation. The Killswitch can also be tapped in time with what is being played to bring effects in and out of the signal path rhythmically. This is especially interesting when one of those effects is a delay with tap tempo. The many and varied uses of the Killswitch pedal are an open invitation for the modern player who wishes to explore the world of unorthodox sound creation and manipulation. Electro-Harmonix Killswitch Momentary Line Selector Features: Momentarily toggle your instrument's signal path between an external FX loop and dry thru Mute your instrument when no effects loop is connected Switchable control over the on/off state of the footswitch Silent switching Buffered bypass Battery powered Optional 9-volt power supply